How to Clean a Spinning Reel [A Complete Beginner’s Guide]
If you’re just starting fishing, it’s important to know how to clean your spinning reel properly to keep it working well for years to come! In this article, we will walk you through the step-by-step process of cleaning a spinning reel.
We will also provide some tips on how to prevent corrosion and extend the life of your reel. Let’s get started!
Tips for keeping your reel clean in the future
It is important to regularly clean the reel body of a spinning reel to keep it functioning properly and preventing it from becoming dirty and unusable.
To do this, start by wiping off any dirt and debris you can see on the outside of the reel with a damp cloth. Once the exterior is free of dust, use light oil such as WD-40 or 3-in-1 Oil to lubricate all moving parts.
Make sure to get into any nooks and crannies where dirt and grime may be hiding. Finally, apply a small amount of oil to the bearings, if your reel has them.
Here are some tips for how to keep your spinning reel clean in the future:
– Rinse your reel with fresh water after each use. This will help remove dirt, salt, and other debris that may build up over time.
– Use a lubricant such as oil to keep the reel’s moving parts functioning smoothly and reduce wear and tear.
– Clean the line spool with fresh water after each use, and make sure that there are no knots or tangles in the line. This will help prevent damage due to friction when you cast your line.
– Store your reel in a cool, dry place when not in use. This will help prevent corrosion and keep the reel clean for longer.
– Inspect the reel periodically for signs of wear and tear, such as rust or broken parts. If necessary, have it serviced by an experienced technician.
List of items required to have before cleaning spinning reels
Before you begin cleaning your spinning reel, make sure you have the following items:
– Soft clothes or paper towels
– Cleaning solution (alcohol, mild soap, and water)
– Bucket or sink filled with warm water
– Grease and oil (for lubrication)
– Small brush/toothbrush
How to disassemble spinning reel
Cleaning and taking care of a spinning reel is an important part of fishing. To properly clean your spinning reel, you will need to disassemble it first. Start by unscrewing the faceplate and side plates from the spool and handle.
This should reveal any dirt or debris that has collected in the inner parts of the reel. Be sure not to lose any of the small pieces or screws!
How to reassemble the reel
Once the spinning reel is dry and clean, it is time to put it back together. Make sure you follow the manual closely when reassembling your reel, as not doing so could cause damage or even void its warranty.
Begin by attaching the bail arm to the main housing of your reel. This part should be easy to identify as it will usually have a large knob that allows you to close or open the line guide.
Now attach the spool assembly back into place using either screws or a pin. If you are uncertain how to do this, consult your product’s instruction manual for guidance on how best to proceed.
Once everything is in place, attach the handle to its designated spot to complete the reassembly. Your reel should now be ready to use again, but make sure you do an initial test cast with it before fishing just in case something isn’t working correctly.
How To Safely Store Your Reel For A Long Period Of Time
Proper storage is essential to protect your spinning reel from the elements and ensure that it lasts a long time. Here are some tips for how to store your spinning reel:
– Store your reel in a cloth bag or case. This will help prevent dust and dirt from accumulating on the reel.
– Do not leave your reel exposed to direct sunlight. This can cause the reel to corrode and degrade over time.
– Avoid storing your reel in damp or humid environments, as this will accelerate corrosion.
– Hang the reel on a wall if possible, as this will help keep it free of dust and dirt particles.
Following these simple tips will help keep your spinning reel in great condition for years to come. With proper care and maintenance, you can enjoy a reliable experience when casting your line into the water.
Frequently Asked Questions
Final Words
Cleaning your spinning reel is an essential part of maintenance that should be done regularly. Doing so can help prevent many issues, like line tangles and rust, from building up over time.
To clean your spinning reel thoroughly, you’ll need to remove the spool, disassemble the body parts, use a degreaser and brush, and apply oil as needed. Be sure to check the manual of your reel for specific instructions on how to service it properly.
With proper maintenance and cleaning, you’ll be able to keep your spinning reel in great condition and ensure that it lasts a long time.
Thanks for reading! We hope this article has given you some helpful tips.
